Contact:
St. Kliment Ohridski University
Faculty of Technical Sciences
Ivo Lola Ribar b.b., 7000 Bitola, R. Macedonia
Tel: 389 47 207 719, fax: 389 47 203 370
Email: igor.andreevski@uklo.edu.mk
Born
Bitola, April 28, 1975, R. Macedonia
Research interest
Thermodynamic and Thermo techniques, Energetic and process engineering, Sustainable energy development and systems, Non-renewable and renewable energy sources, Nuclear reactors, Environment pollution and protection, Mechanical materials and material testing
Academic Grades
Ph.D. Degree in Technical Sciences
- July 2008, St. Kliment Ohridski University, Bitola, MKD
- Thesis: Inverse concept application in dispersion models development and verification
- Supervisor: Academic G. Kanevce
Master of Technical Science
- December 2002, St. Kliment Ohridski University, Bitola, MKD
- Thesis: Planetary boundary layer modeling and pollutants dispersion modeling at small wind velocities
- Supervisor: Academic G. Kanevce
Diploma Degree in Mechanical Engineering
- July 1998, St. Kliment Ohridski University, Bitola, MKD
- Thesis: Hydraulic analysis and technical solution for providing necessary cooling water circulation flow for units I, II and III in REK “Bitola” – Bitola
- Supervisor: Professor S. Panovski
Positions
September 2022 – till now – Vice dean for finances – Faculty of Technical Sciences, St. Kliment Ohridski University, Bitola, MKD
June 2018 – Full Professor – Faculty of Technical Sciences, St. Kliment Ohridski University, Bitola, MKD
June 2013 – June 2018 – Associated Professor – Faculty of Technical Sciences, St. Kliment Ohridski University, Bitola, MKD
November 2008 – June 2013 – Assistant Professor – Faculty of Technical Sciences, St. Kliment Ohridski University, Bitola, MKD
September 1998 – November 2008 – Assistant – Faculty of Technical Sciences, St. Kliment Ohridski University, Bitola, MKD
Subjects
First study cycle: Thermodynamic, Applied thermodynamic, Sustainable energy development, Sustainable energy systems, Nuclear reactors, Technology of the materials.
Second study cycle: Thermodynamic – selected chapters, Environment impact assessment.
Third study cycle: Heat and mass transfer – selected chapters; Power engineering in process technology.
Books
– I. B. Andreevski: “Solved Tasks in Thermodynamics and Mini-Manual with formulas, data and graphs”, ISBN 978-9989-786-88-4, COBISS.MK-ID 95263754, CIP – 536(075)(075.8), Faculty of Technical Sciences – Bitola, St. Kliment Ohridski University, Bitola, 2014.
– “Technology of the materials”, Faculty of Technical Sciences – Bitola, University “St. Kliment Ohridski”, Author: S.Nusev, I. Andreevski is signed as coauthor, Bitola, 2002.
– I. Andreevski is signed as author of exercises books for subjects “Technology of casting and welding”, “Technology of thermal processing”, “Thermodynamic 1”, “Thermodynamic 2”, “Thermo technique”, “Heat transfer”, “Nuclear reactors”, “Sustainable energy systems” and “Integrated CAD/CAM systems applications”.
– Project “SOHO Based Employment on International Market of Outsourced Engineering Jobs”, financed by the European Agency for Reconstruction, Project manager: I. Nedelkovski, I. Andreevski participated as teacher-instructor, realized during 2004-2005, Bitola.
Foreign visits
– ICAMES, Bosfor University, May 2005, Istanbul, Turkey.
– Technical University – TU Wien, October 2012, Vienna, Austria.
– Fellow scholarship by the World Federation of Scientists (National scholarship programme) for the 2007 year.
Conferences
LIST OF PUBLISHED SCIENTIFIC AND RESEARCH PAPERS AND REPORTS
- Educational papers (Made through postgraduate studies)
[1]
Andreevski Igor –
“Writing and publishing engineering papers and report”, Seminar paper, Bitola, 1999.
[2]
Andreevski Igor –
“Software packages application in the scientific-research activities”, Seminar paper, Bitola, 1999.
[3]
Andreevski Igor –
“Atmosphere stability influence on the SO2 pollutant dispersion in Thermo Power Plant (TPP) “Bitola””, Seminar paper, Bitola, 1999.
[4]
Andreevski Igor –
“Application of mathematical modeling and Microsoft Excel in modeling heat transfer processes”, Seminar paper, Bitola,1999.
[5]
Andreevski Igor –
“Numerical methods implemented in heat conduction process”, Seminar paper, Bitola, 2000.
[6]
Andreevski Igor –
“Modeling emission and parameters of outgoing flue gases from thermo power plants boiler units”, Seminar paper, Bitola, 2000.
[7]
Andreevski Igor –
“Modelling pollutants mass transport in Gauss dispersion models”, Seminar paper, Bitola, 2000.
[8]
Andreevski Igor –
“Air pollution and degree of air toxicifficion in TPP”Bitola” surrounding – potential risks on human environment”, Seminar paper, Bitola, 2001.
[1] G. Тrombev, G. Каnеvce, А. Маrkoski,
I. Аndreevski –
“Ecological aspects in sugar production industry “, XIII Congress about processing equipment and industry, Procesing ’99, Belgrade, Octomber 1999.
[2]
I. Аndreevski, Lj. Каnеvce, А. Маrkoski –
“Atmospheric stability analysis in the TPP “Bitola” surrounding and possible reflection on pollutants dispersion”, I Symposium of AD ESM, Bitola, December 1999.
[3] G. Тrombev,
I. Аndreevski –
“Deposit materials from coal fired Thermo plants”, I Symposium of AD ESM, Bitola, December 1999.
[4] G. Тrombev, G. Каnеvce, М. Dukovski,
I. Аndreevski –
” Ventilation in factories for processing sea salt”, XIV Congress about processing equipment and industry, Procesing 2000, Belgrade, June 2000.
[5]
I. Аndreevski, A. Аndreevska –
“Estimating disperse content of water drops in scrubber unit”, International symposium “Kogenerative and heat energy supply systems in urban areas and industry”, ZEMAK 2000, Ohrid, October 2000.
[6] G. Тrombev, G. Каnеvce, А. Маrkoski,
I. Аndreevski –
” Influence of additional water drop dispersion and evaporation on flue gases cleaning in venture channel”, XV Congress about processing equipment and industry, Procesing ‘01, Belgrade, November 2001.
[7] G. Тrombev, Stefanovska C.,
I. Аndreevski –
“Flue gases velocity influence on scrubber unit processes”, Eight symposium of DTRM, Ohrid, 2001.
[8] G. Тrombev, Stefanovska C.,
I. Аndreevski –
“Water dispersion coefficient influence on processes in scrubber venture channel”, Eight symposium of DTRM, Ohrid, 2001.
[9]
I. Аndreevski, G. Каnеvce, Lj. Каnеvce, А. Маrkoski –
“Pollutants dispersion modeling at small wind velocities”, International symposium 4E – “Energy, efficiency, ecology and economy”, ZEMAK 2002, Struga, October 2002.
[10]
I. Аndreevski –
“Planetary boundary layer modeling and pollutants dispersion modeling at small wind velocities”, Master thesis, Faculty of Technical Sciences – Bitola, Bitola, December 2002.
[11] Nusev S., Temeljkovski D.,
Andreevski I.,
“Tekcast spin-cast tehnology”, 4
th Internacional symposium Bihac, BiH, 2005.
[12]
I. Аndreevski, G. Каnеvce, Lj. Каnеvce, А. Маrkoski, G. Тrombev, –
“Dispersion models verification options”, XIX Congress about processing equipment and industry, Procesing 2006, Belgrade, June 2006.
[13]
I. Аndreevski, G. Каnеvce, Lj. Каnеvce –
“Verification options of the results from implementation of computer dispersion model MADAM (MAcedonian Dispersion Atmospheric Model)”, International symposium “Energetic 2006”, ZEMAK 2006, Ohrid, October 2006.
[14]
I. Аndreevski: “
Air pollution modeling – possibilities and challenges”, Presentation of “environmental activities” of Faculty of Technical Sciences in the frame of Interreg III project “Development of knowledge network of educational and research Institutes active in environmental issues for the development of a common cooperation framework, for the harmonization with EU legislation and know-how transfer”, Bitola, R. Macedonia, February 15, 2007.
[15] G. Каnеvce, Lj. Каnеvce,
I. Аndreevski, G. Dulikravich: “
Inverse approaches in improvement of air polution plume dispersion models for regulatory applications”, Inverse Problems, Design and Optimization Symposium, Miami, Florida,U.S.A., April 16-18, 2007.
[16]
I. Аndreevski: “
Model MADAM recent improvements and inverse concept implementation”, Emission Control Technologies – Air pollution control and prevention Workshop, Thessalonica, Greece, May 14-16, 2007.
[17] Nusev S.,
Andreevski I.:
“Modern computer technology application in plastic material inject molding simulation”, 8
th Scientific symposium DEMI2007, Banja Luka, BiH, May 25-26, 2007.
[18]
I. Аndreevski, G. Каnеvce, Lj. Каnеvce:
“Model madam algorithms corrections influence on the calculated ground level concentrations of the pollutants”, 8
th Scientific symposium DEMI2007, Banja Luka, BiH, May 25-26, 2007.
[19] Nusev S.,
Andreevski I.:
“Plastic material inject molding simulation using software package “moldflow””, XX Congress about processing equipment and industry, Procesing 2007, SMEITS, Belgrade, June 13-15, 2007.
[20]
I. Аndreevski, G. Каnеvce, Lj. Каnеvce:
“Influence of atmospheric stability definition over the polutants dispersion calculations”, XX Congress about processing equipment and industry, Procesing 2007, SMEITS, Belgrade, Serbia, June 13-15, 2007.
[21] S. Nusev,
I. Аndreevski, D. Temeljkovski:
“Modern technology application in electro industry parts production”, XLIII International Scientific Conference on Information, Communication and Energy System and Technologies, ICEST 2008, Faculty of Electronic Engineering, Nis, Serbia, June 25-27, 2008.
[22] Аndreevski I.:“
Inverse concept application in dispersion models development and verification”, PhD thesis, Faculty of Technical Sciences – Bitola, Macedonia, July 2008.
[23]
Andreevski I., Nedelkov G., Slivoski O.:
“Bio-briquette as an alternative to crude oil in the district heating systems”, International Symposium “Energetic 2008”, ZEMAK 2008, Ohrid, October 09-11, 2008.
[24]
Andreevski I., Nedelkov G., Slivoski O.:
“Comparative analysis of housing objects heating energy supplies using two different energy sources”, International congress and exhibition on heating, refrigeration and air-conditioning (HVAC&R), SMEITS, Belgrade, December 03-05, 2008.
[25] C. Dimitrieska,
I. Аndreevski, G. Trombev:
“Rational state and measuring of co2 parametars of sources and pipe routes of factory for mineral water and co2 Lozar – Pelisterka”, 9
th Scientific symposium DEMI2009, Banja Luka, BiH, May 28-29, 2009.
[26] S. Nusev,
I. Аndreevski:
“Injection tools construction for thin-wall polymer products using contemporary computer methods”, 9
th Scientific symposium DEMI2009, Banja Luka, BiH, May 28-29, 2009.
[27]
I. Аndreevski:
“Bio-fuels as a substitute to the crude oil derivates in the district heating systems”, 9
th Scientific symposium DEMI2009, Banja Luka, BiH, May 28-29, 2009.
[28]
I. Аndreevski, C. Dimitrieska, G. Trombev, R. Ristovski, O. Slivoski:
“Rational state and meassuring of CO2 parametars of sources and pipe routes of factory for mineral water and CO2 Lozar-Pelisterka”, XXII Congress about processing equipment and industry, Procesing 2009, SMEITS, Belgrade, Serbia, June 10-12, 2009.
[29] Kanevce G., Kanevce Lj.,
Аndreevski I.:
“Macedonian Coal – Impact of Thermal Power Plants on the Environment”, Regional Energy Business Forum, Tehnoma 2009, Skopje, October 13-14, 2009.
[30]
Andreevski I., Kanevce G.
and Kanevce Lj.:
“Leverberg-Marquard method for inverse estimations in dispersion modeling”. Proceeding of the 13th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purpose in Paris, pp.934-938, France, June 1-4, 2010.
[31]
Andreevski I., Kanevce G.
and Markoski A.:
“Dispersion models result’s improvements using inverse approach”. Proceeding of the 13th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purpose in Paris, pp.977-981, France, June 1-4, 2010.
[32]
Andreevski I.:
“Review and analysis of experimental data for performing dispersion models numerical simulations”, International Symposium “Energetics 2010”, Association of Energy Department Engineers of Macedonia, Оhrid, October 07-09, 2010.
[33]
Andreevski I., Kanevce G., Kanevce Lj.:
“Basic conditions for inverse procedures application in dispersion modeling”, International Symposium “Energetics 2010”, Association of Energy Department Engineers of Macedonia, Оhrid, October 07-09, 2010.
[34] Stavreva S., Serafimov М.,
Andreevski I.:
“Impact of distribution at air of energy efficiency in data center”, International Symposium “Energetics 2010”, Association of Energy Department Engineers of Macedonia, Оhrid, October 07-09, 2010.
[35] Nedelkov G.,
Andreevski I., Slivoski О., Stavreva S.
:
“Instant water heater connected to a central heating system as measure to increase energy efficiency”, International Symposium “Energetics 2010”, Association of Energy Department Engineers of Macedonia, Оhrid, October 07-09, 2010.
[36] Igor Andreevski, Gligor Kanevce, Ljubica Kanevce: “Mathematical
Dispersion Models – Possibilities and Conditions for Inverse Estimations Application”. The 9th International Symposium
-’Power and Process Plants
’, Dubrovnik, Croatia, 29.09-01.10, 2010.
[37]
Аndreevski I., Kanevce G., Kanevce Lj., Markoski A., Stavreva S.:
“Development and application of regulatory dispersion model for air pollution assessment”, 10
th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2011, Banja Luka, BiH, May 26-28, 2011.
[38] Stavreva S., Serafimov M.,
Аndreevski I.:
“Reducing consumption of energy of data centers”, 10
th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2011, Banja Luka, BiH, May 26-28, 2011.
[39]
I. Аndreevski, G. Kanevce, Lj. Kanevce, A. Markoski, S. Stavreva:
“Pollutants dipersion modeling using classical and modified Gaussian models”, 15
th Symposium on Termal Science and Engineering of Serbia, Sokobanja, Serbia, October 18-21, 2011.
[40] S. Stavreva, M. Serafimov,
I. Аndreevski:
“Application of liquid cooling in datacom equipment”, 15
th Symposium on Termal Science and Engineering of Serbia, Sokobanja, Serbia, October 18-21, 2011.
[41] Kanevce G., Kanevce Lj.,
Аndreevski I.: “
Energy sector in Republic of Macedonia – conditions, needs and opportunities ”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, October, 2011.
[42]
I. Аndreevski, G. Kanevce, Lj. Kanevce: “
Inverse estimations – application in air pollution modelling”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, October, 2011.
[43]
I. Аndreevski, D. Milosevski, C. Dimitrieska, A. Andreevska, S. Stavreva:
“Temperature distribution in steel reinforced concrete beam under fire conditions”, XXV Congress about processing equipment and industry, Procesing 2012, SMEITS, Belgrade, Serbia, June 7-8, 2012..
[44] S. Stavreva, M. Serafimov,
I. Аndreevski:
“ Analysis of airflow in a DATA center
“, XXV Congress about processing equipment and industry, Procesing 2012, SMEITS, Belgrade, Serbia, June 7-8, 2012.
[45] S. Stavreva, M. Serafimov,
I. Аndreevski:
“Application of CFD air flow analysis in DATA centar”, International Symposium “Energetics 2012”, Association of Energy Department Engineers of Macedonia, Оhrid, October 04-06, 2012.
[46]
I. Аndreevski,D. Milosevski: “
Steel reinforced concrete beam temperature distribution under fire conditions”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, October, 2012.
[47] Nusev S,
Andreevski I., et all: “
Modeling and analysis of open mechanical crank press static characteristics”, 11
th International scientific conference – Advanced production technologies MMA 2012, Novi Sad, Serbia, 2012.
[48] S. Stavreva, M. Serafimov,
I. Аndreevski,
C. Dimitrieska:
“Use of CFD analyses to achive energy efficient data center”, 11
th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2013, Banja Luka, BiH, May 30 – June 01, 2013.
[49] Kire Popovski, Stojance Nusev,
Igor Andreevski:
“Ring‐type water supply networks”, 11
th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2013, Banja Luka, BiH, May 30 – June 01, 2013.
[50]
Аndreevski Igor, Kanevce Gligor, Kanevce Ljubica, Stavreva Sevde, Popovski Kire:
“Inverse estimations application in the field of dispersion modeling”, 11
th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2013, Banja Luka, BiH, May 30 – June 01, 2013.
[51]
Igor Andreevski, Gligor Kanevče, Ljubica Kanevče, Atena Andreevska, Sevde Stavreva:
“Introducing inverse approach in dispersion modeling”, XXVI Congress about processing equipment and industry, Procesing 2013, SMEITS, Belgrade, Serbia, June 6-7, 2013.
[52]
Igor Andreevski, Gligor Kanevče, Ljubica Kanevče:
“Dispersion models results verification – model MADAM case study”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, October, 2013.
[53] K. Popovski,
I. Аndreevski:
“Heat exchangers comparation”, 16
th Symposium on Termal Science and Engineering of Serbia, Sokobanja, Serbia, October 22-25, 2013.
[54]
Igor Andreevski, Sevde Stavreva: “
CO2 emission estimation as a result of energy buildings consumption ”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, April, 2014.
[55] V. Mitrevski, T. Geramitcioski, G. Trombev, V. Mijakovski,
I. Andreevski: “
Blower door test – Measurement protocol”, International Conference on Buildings Energy Efficiency and Renewable Energy Sources 2014, 1-3 June 2014, Kozani, Greece.
[56]
I. Andreevski, G. Trombev, V. Mitrevski, V. Mijakovski, T. Geramitoski: “
Energy Management System and Substitution of Fuels and Energy Sources in Public Buildings”, International Conference on Buildings Energy Efficiency and Renewable Energy Sources 2014, 1-3 June 2014, Kozani, Greece.
[57] T. Geramitoski, G. Trombev, V. Mitrevski, V. Mijakovski,
I. Andreevski: “
Implementation the tasks of the Renewable Energy Directive 2009/28/EC in EU Members and the former Yugoslav Republic of Macedonia as a country-candidate”, International Conference on Buildings Energy Efficiency and Renewable Energy Sources 2014, 1-3 June 2014, Kozani, Greece.
[58]
I. Andreevski:
“Energy needs and measures for increased building energy efficiency implementing lower energy consumption”, National conference for buildings energy efficiency, 10-11 June, Bitola 2014.
[59]
I. Andreevski, S. Stavreva:
“Energy management system – basic aspects”, International Symposium “Energetics 2010”, Association of Energy Department Engineers of Macedonia, Оhrid, October 16-18, 2014.
[60]
I. Andreevski, V. Mitrevski, V. Mijakovski:
“Buildings energy consumption and related CO2 emissions”, IV
International Conference Indutrial engineering and environmental protection (IIZS 2014), 15th October 2014, Zrenjanin, Serbia.
[61]
I. Andreevski, G. Kanevce, Lj. Kanevce, S. Stavreva:
“Dispersion model for regulatory purposes: Development and evaluation”, International Journal of Mechanical Engineering and Automation, Volume 2, Number 1, 2015, pp.47-53.
[62] Cvete Dimitrieska,
Igor Andreevski, Sanja P. Vasilevska, Sevde Stavreva:
“Numerical solution of mathematical model for fluid flow and heat transfer processes in plate exchanger base on streamline – vortex method”, 12th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2015, Banja Luka, BiH, May 29 – 30, 2015.
[63] Sevde Stavreva, Cvete Dimitrieska,
Igor Andreevski, Sanja P. Vasilevska, Elizabeta Hristovska:
“Improving energy efficiency of data centres”, 12th Anniversary International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI2015, Banja Luka, BiH, May 29 – 30, 2015.
[64]
I. Andreevski, S. Stavreva:
“Basic aspects of Energy Management System (EMS)”, Energetics – Internation journal, Num.23-98/23-99, June/July, 2015, pp.35-37,48,49.
[65]
I. Andreevski, K. Popovski, I. Popovski: “
Mathematical model as foundation for creation of computer software for defineing the temperaturefield at heat- transfering rib”, Proceedings – Faculty of Technical Sciences, Faculty of Technical Sciences – Bitola, University St. Kliment Ohridski – Bitola, Bitola, October, 2015.
[66] Lutovska, M., Mitrevski, V., Geramitcioski, T., Mijakovski, V.,
Andreevski, I., 2016, “
Water activity vs. equlibrium moisture content”, Journal of Agriculture Science and Technology, 20 (2), pp. 69-72.
[67] Dimitrieska C.,
Andreevski I., Stavreva S., Krasniqi G.: “
Integral Mathematical Model for Venturi Apparatus Integrated with Plate Heat Exchanger”, International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 ISSN 2229-5518: 1686 – 1689.
[68] Stavreva S., Dimitrieska C., Hristovska E.,
Andreevski I.: “
Study of a data center and creation of its numerical model”, International Journal of Scientific & Engineering Research, Volume 7, Issue 12, December – 2016 ISSN 2229-5518: 1156 – 1160.
[69] Lokaj-Qerimi D., Dimitrieska C.,
Andreevski I., Popovska-Vasilevska S. : “
Process System Engineering and Sustainability”, International Journal of Scientific & Engineering Research, Volume 8, Issue 1, January-2017, ISSN 2229-5518, pp 1107 – 1111.
[70] Krasniqi G., Dimitrieska C., Muriqi A.,
Andreevski I., Stavreva S.: “
Wind Turbines Potential Energy Production in three Locations of Kosovo and its Impact on the Environment”, International Journal of Scientific & Engineering Research, Volume 8, Issue 1, January-2017, ISSN 2229-5518, 1347-1349.
[71] Oliver Slivoski,
Igor Andreevski, Stojance Nusev, Dragan Temeljkovski, Vitomir Stojanovski: “
Analysis and Comparison Exhaust Gas Emissions of Pellet Boiler while Working into Three Different Types of Pellets”, TEMEL International Journal, Volume 1, Issue 1, May 2017, ISSN 2545-4390, pp. 33-40.
[72] Krasniqi G., Dimitrieska C.,
Andreevski I., Stavreva S., Krasniqi K.: “
Average wind velocity, direction and distribution in six regions of Kosovo”, TEMEL International Journal, Volume 1, Issue 2, October 2017, ISSN 2545-4390, pp. 34-39.
[73]
Andreevski I., Mitrevski V., Stavreva S., Dimitrieska C., Slivoski O.: “
Energy Management System (EnMS) – Case of Energy Source Substitution in Primary School Building”, 18th Symposium on Thermal Science and Engineering of Serbia, October 17 – 20, 2017, Sokobanja, Serbia.
[74] Stavreva S., Serafimov M.,
Andreevski I.: “Data center air flow analisys”, XXX Congress about processing equipment and industry, Procesing 2017, SMEITS, Belgrade, Serbia, April, 2017.
[75] M. Atanasovski, M. Kostov, B. Arapinoski and
I. Andreevski: “Correlation between Power System Load and Air Temperature in Republic of Macedonia”, 53rd
Int. Scientific Conf. on Information Communication and Energy Systems and Technologies, pp. 213-216, 28-30 Junе. 2018, Sozopol, Bulgaria.
[76] Oliver Slivoski, Stojance Nusev, Dragan Temeljkovski,
I. Andreevski: “
Increasing lifetime of the die for straw pellets by changing existing design”, 4
th International conference Mechanical engineering in XXI century, Faculty of Mechanical engineering in Nis, April 19-20, 2018.
[77]
Andreevski Igor, Nedelkov Goran, Slivoski Oliver: “
Comparative analysis of residential buildings heating energy supply using two different energy sources”,
International congress KGH procedings, [S.l.], v. 39, n. 1, p. 442-448, july 2019.
[78] Oliver Slivoski,
I. Andreevski, G. Kozarov, S. Stavreva: “
Public water supply as an alternative energy”, 27
th Interrnational Conference EcoTER Proceedings, 18-21 June, 2019, University of Belgrade, Technical Faculty in Bor, p.p.485-490.
[79] Angelevska Beti, Atanasovski Metodija,
Andreevski Igor, Arapinoski Blagoj: “
Real-time urban air pollution monitoring using unmanned aerial vehicles”, International Scientific Journal Innovations, VIII (1). pp. 29-32, 2020. ISSN 2603-3763.
[80] Angelevska Beti, Atanasova Vaska,
Andreevski Igor: “
Socially sustainable transport in low income countries”, Horizons International scientific journal, 9. pp. 19-27, 2021. ISSN 1857-9892.
[81] Angelevska Beti, Atanasova Vaska,
Andreevski Igor: “
Urban Air Quality Guidance Based on Measures Categorization in Road Transport”, Civil Engineering Journal, 7 (2). pp. 253-267, 2021. ISSN 2676-6957.
[82] Angelevska Beti, Atanasova Vaska,
Andreevski Igor: “
Crowd-sourcing: Citizens as scientists for air pollution monitoring”, 56
th International Scientific Conference on Information, Communication and Energy Systems and Technologies (ICEST), Sozopol, Bulgaria, 16-18 June 2021, IEEE, pp.131-134.
[83] Dimovski B., Stavreva S., Dimitrieska C.,
Andreevski I.: “
Proposed Solution for Adaptation of the Block in TPP Bitola using Gas Turbine Combined Cycle”, DOI: 10.18421/TEM Journal 111-19, Vol. 11, No. 1, pages 164-168, February 2022.
[84] Stavreva S., Hristovska E.,
Andreevski I., Popovska-Vasilevska S.: “
Impact of Covid-19 on Heating, Ventilation and Air-Conditioning Systems”, DOI: 10.18421/TEM Journal 114-17, Vol. 11, Issue 4, pages 1563-1568, November 2022.
- Participation in professional-application projects
[1]
“Ecological-technological project for sugar factory “4th November – Bitola”, Project leader institution: Faculty of Technical Sciences – Bitola, Project manager: G.Kanevce,
I. Andreevski take a part as co-operator, Bitola, February 1999.
[2]
“Technical and professional potentials and references of Faculty of Technical Sciences – Bitola in environment protection and development “, Project leader institution: Faculty of Technical Sciences – Bitola, Project manager: G.Kanevce,
I. Andreevski take a part as co-operator, Bitola, March 1999.
[3]
“Ecological-technological project for TPP”Bitola” and coal mine “Suvodol”, Project leader institution: Faculty of Technical Sciences – Bitola, Project manager: G.Kanevce,
I. Andreevski take a part as co-operator, Bitola, 2000.
[4] “
Heat energy supply systems for city Bitola”, Project leader institution: Faculty of Technical Sciences – Bitola, Project manager: G.Trombev,
I. Andreevski take a part as co-operator, Bitola, 2000.
[5]
“Elaborate for existing condition, Preliminary and Main project for hot steam pipeline system reconstruction – Coal mine “Suvodol””, Project leader institution: Mepring – Skopje, Project manager: G. Trombev,
I. Andreevski take a part as co-operator – planning engineer, Skopje, 2002.
[6] “
Analysis of possible solutions considering environment impact of Sugar factory “4th November – Bitola” boiler units”, Project leader institution: Faculty of Technical Sciences – Bitola, Project manager: G.Kanevce,
I. Andreevski take a part as co-operator – planning engineer, Bitola, 2002.
[7] “
Investment Options in the Energy Sector – Component 1: Action Plan for Fuel Supply to the TPP Bitola”, PHARE Projekt, International Companies Consortium (Project leader: Exergia (Greece), including: CESEN SpA (Italy), Rhein-Ruhr Ingenieur GmbH-RRI (Germany), Denmark energy consulting A.S., United law offices Vassardanis-Verveniotis, CSFTA and Energy-System),
I. Andreevski take a part as co-operator – planning engineer, Skopje, 2003.
[8] “
Steam boiler handlers training in factory “Kvasara” – Bitola””, Kanevce G.,
Andreevski I. et. all., Course and Training, Bitola, May 2005.
[9] “
Main project: Boiler room for technology steam and hot water, technology steam installations in tobacco processing plant and HVAC in administrative building of tobacco processing plant “Aliance””, Project leader company: Ivanov Engineering – Bitola,
I. Andreevski take a part as planning engineer, Bitola, 2007.
[10] “
Measurements report about the gas carbon dioxide rational state in the factory for mineral water and CО2 – AD “Lozar – Pelisterka””, Kanevce G., Trombev G.,
Andreevski I., Dimitrieska C., Ristevski R., Skopje, March, 2007.
[11] “
Steam boiler handlers training in factory “Lozar – Pelisterka” – AD Skopje”, Kanevce G.,
Andreevski I. et. all., Course and Training, Bitola, February 2009.
[12] “
Report on cardon dioxide gas flow determination in the gas supplying pipeline in the СО2 liquefaction plant AD “Lozar – Pelisterka””, Kanevce G., Trombev G.,
Andreevski I., Dimitrieska C., Ristevski R., Skopje, May, 2009.
[13] “ Authorized controllers in the process of energy efficiency audit – training and final exam implementation
” – Faculty of technical sciences – Bitola, Bitola, March 2014.
[14] “ Authorized controllers in the process of energy efficiency audit – training and final exam implementation
” – Faculty of technical sciences – Bitola, Bitola, October 2014.
- Participation in scientific-research projects
[1]
“Thermo hydraulically aspects of water washing high speed flue gases and application of different constructions”, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Science, Leading researcher: G.Trombev,
I. Andreevski take a part as co-operator – young researcher, Bitola, 2000.
[2]
“Noise and vibrations in graphical industry”, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Science, Leading researcher: T.Geramitchioski,
I. Andreevski take a part as co-operator – young researcher, Bitola, 2001.
[3]
“MADAM – MAcedonian Dispersion Atmospheric Model”, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Education and Science, Leading researcher: A.Markoski,
I. Andreevski take a part as co-operator – young researcher, Bitola, 2001.
[4] “
Investigation and development of dynamical caracteristics for the mechanical presses with the usage of the contemporary elastic supporters”, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Education and Science, Leading researcher: S.Nusev,
I. Andreevski take a part as co-operator – researcher, Bitola, 2004.
[5]
“Multichannel modular venture unit integrated with panel heat exchanger”, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Education and Science, Leading researcher: G.Trombev,
I. Andreevski take a part as co-operator – researcher, Bitola, 2006.
[6]
“Results verification and inverse concept in dispersion modeling – application on dispersion model madam”, financed by the World Federation of Scientists national scholarship programme, Leading researcher:
I. Andreevski, 2007.
[7]
“ New capacities and applications of inverse approach methodology
“, Project leader institution: Faculty of Technical Sciences – Bitola, financed by the Ministry of Education and Science, Leading researcher: Lj. Kanevce,
I. Andreevski take a part as co-operator – researcher, Bitola, 2011-2012.
- Participation in developmental-research projects
[1] “
Technology for fast and cheap production adoption of molding products made by alloys with molding temperatures up to 530 oC and plastic parts from poluretans, epoxy resin and poluesters”, Leading researcher: S.Nusev, financed by the Ministry of Education and Science of the R. Macedonia.
I. Andreevski take a part as co-operator, Bitola, 2004/2005.
[2] “
New construction development of tools for rolls covers production with own sealing”, Leading researcher: S.Nusev, financed by the Ministry of Education and Science of the R. Macedonia.
I. Andreevski take a part as co-operator, Bitola, 2006/2007.
[3] “
Injection tools construction for thin-wall polymer products using contemporary computer methods”, Leading researcher: S.Nusev, financed by the Ministry of Education and Science of the R. Macedonia.
I. Andreevski take a part as co-operator, Bitola, 2007/2008.
– Association of Power Engineers of Macedonia,
– Chamber of authorized architects and authorized engineers of Macedonia